276°
Posted 20 hours ago

Hammerite Kurust Rust Remover for Metal. Rust Treatment and Rust Converter for Metal Interior and Exterior to Remove Brown Spots - 90ml

£30.445£60.89Clearance
ZTS2023's avatar
Shared by
ZTS2023
Joined in 2023
82
63

About this deal

It’s not often we say we’re disappointed with a product and still give it a recommended award, but Bilt-Hamber products normally excel. So when this is applied, this will first of all act as a solvent to the contamination and the oil or grease will combine with the coating. But some minor surface corrosion had started to become visible on both sides of our sample by the end of our test period.

The Loctite fluid was far more watery than the other treatments, which meant it soaked into the rusty surface quickly. Kurust should turn blue/black whilst reacting with the rust, if the area does not change colour re-apply within 1 hour.EASY TO USE - preparation is simple - just brush away any loose, flaky paint or rust and use a small brush to apply the rust converter directly onto metal. On oil or grease contaminated areas, unless the underside is extremely thoroughly cleaned, degreased, and then completely dried, the rust converter will not work. There are numerous types of these potions on the market, and they all claim to be the best, so we tested a selection of products to see which you should trust to sort your rust. If you want to remove rust from nuts, bolts, garden tools and other metal objects, Hammerite Rust Remover Gel Blister is ideal for the job. Unfortunately in the event you do not like the colour we are unable to accept the product back if they it has been opened.

This product is ideal for small areas of rust, stone ships and scratches and converts iron oxide to stable iron complexes. Fastcar Automotive and post to our address which is located in the Business Seller Information below. It was the first sample to show rust reappearing, and by the end of the test period the protection had almost completely disappeared from the unpainted side, and was starting to reappear on the other face too. Itemssent by Courier: Additional charges to Republic ofIreland, Channel Islands, Northern Ireland, Isle of Man, ScottishIslands and all other islands off the mainland. We left sections of 1mm unpainted mild steel to gently corrode outside over the course of several months, then let them thoroughly dry before treating both sides with our products, carefully following the instructions.

Republic of Ireland, Channel Islands, Northern Ireland (Carrieritems only) Isle Of Man, Scottish Islands And all off shoreIslands excluding Isle of Wight.

The wax/converter coating is only as good as the performance of the converter, which, as we have seen is not good.Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. Shake tub prior to use and poora little liquid into a separate container so you don't contaminate the whole thing. It still offers much better protection than most of the products we tested, and the coating seems tough.

We were dubious at first because the liquid was watery when applied and seemed to want to bead off the surface rather than soak in, but after 15 minutes our sample had turned dark blue and allowed us to apply another coat. A coating of waxoyl/dinitrol etc over the area which has been converted will not penetrate into the converter because it contains a latex copolymer. If you are getting underneath a car, make sure you use axle stands or ramps and wear eye protection and a mask. Hammerite Kurust Treatment is an excellent product for anyone who needs to treat small areas of rust on metal surfaces. Products shown, tagged or featured on YouTube by creators are sold by merchants and are subject to merchant's terms and conditions.The 90ml blister pack is ideal for stonechips and scratches and is simple to apply � no need to rinse off. At GetGeared Leatherhead we offer appointments - while not required, of you want to make sure certain items are there in your size, it's worth doing. The best thing about Kurust is that it eliminates the need for primer or undercoat, making the application process quicker and easier. If you are treating a rust bubble on the bodywork, you will want to remove as much of the rust as possible before treating or it will soon reappear under any filler and top coat. The treated areas can then have a top coat applied after as little as three hours and does not need a primer or undercoat to be applied first.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment